Shaping quality steel

Meusberger_tmbF-Plates are ideal for making mould bases says Meusburger Georg. They are supplied with pillar and screw holes and available immediately from stock. They are offered in a range of 27 materials, examples of which are on the firm’s stand at Southern 2018.

The company heat treats all steel plates for stress relief in one of its three furnaces for 24 hours to create the best conditions for low-deformation processing of parts.

The systematically co-ordinated standard hole pattern provides a continuous system from the smallest through to the biggest mould base. Cooling channels can be inserted between the guiding hole and the screw holes of any size of mould. The distance to the edge remains the same for each guiding diameter.

Lever slots are provided on all moulding plates with a pillar diameter larger than of 20mm. The recessed edges facilitate the manual opening of the mould in the split line face and the removal of moulding plates. For quick and easy alignment, the moulding plates have an alignment edge parallel to the guiding holes.

The mounting thread is provided in each of the F70 risers of the mould base. The clamping plate can be removed with the risers when disassembling the mould for access to the ejector set during a revision.

Meet Meusburger Georg on stand J160 or find out more at https://www.meusburger.com

Advertisements